Reliable Performance Biomass Drum Dryer

biomass rotary dryer -Optimized structure -More professional -No pollution to material -Production10-15% improve

A compelet set of rotary drum dryer should be composed of  cylinder, gear ring, roll ring, steel spring plate, carrier roller, feed chute, bearing, lifting plate, discharge hole, reducer, velodyne, etc.

Technical Parameter 

Model	Main reducer		Speed (r/min)	Feeding capacity (t/h)	Power (kw)	Volume (m3)	Weight (t)
	Model	Ratio
Φ1.0X10	JZQ450-16-11		6.73	1-3.8	5.5	7.85	7.5
Φ1.2X12	ZL50-16-1		5.8	1.8-5.5	11	13.31	13.8
Φ1.5X12	JZQ500-111-2F	16.46	4.8	4-9	15	21.2	22.3
Φ1.5X 15	ZQ50-1611-2	16.46	4.8	4-10	18.5	26.5	28.8
Φ1.8X14	JZQ650-111	18.84	3.2	6-12	30	48.22	39.8
Φ2.2X12	JZQ650-111	31.5	3	10-20	30	45.6	40.5
Φ2.2X14	JZQ750-111	31.5	3	10-22	37	53.2	48.3
Φ2.2X16	ZJQ750-111	31.5	3	10-23	37	60.1	51
Φ2.2X18	JZQ750-111	31.5	3	10-25	37	70.43	53.3
Φ2.4X14	ZL850-13-1	27.6	2.83	20-43	45	63.3	61.5
Φ2.4X18	ZL85-13-1	27.16	2.83	20-40	45	81.4	68.6
Φ2.4X20	ZL85-13-1	27.16	2.83	20-40	45	90.43	78.4

Working principle of biomass drum dryer

Materials are sent to hopper of rotary dryer by belt conveyor or bucket elevator. The barrel is installed with slope to horizontal line. Materials enter the barrel from the higher side, and hot air enters the barrel from the lower side, materials and hot air mix together. Materials go to the lower side by gravity when the barrel rotates. Lifters on the inner side of barrel lift materials up and down to make materials and hot air mix completely. So drying efficiency is improved.

Advantages of biomass drum dryer

1. Rotary drum dryer has strong anti overload ability, large handing capacity, less fuel consumption, low dry cost.

2. Adopt downstream drying method, the hot air with wet materials enter into the dryer by the same side, can use the high temperature air to achieve very high evaporation strength, the exist temperature of dryer is low, the thermal efficiency is high.

3. According to different materials' properties change operation parameters, make the material in the dryer cylinder body can form a stable all broken fabric curtain, qualitative heat is more fully.

4. New internal structure, strengthened the already scattered materials' cleaning and heat transfer effect, eliminated the sticky phenomenon in cylinder body’s inner wall, make material moisture, sticky adaptability more stronger.

5. Dryer has realized "zero horizontal thrust", greatly reduce the wear of block roller, cylinder’s operation is smooth and reliable.

6. Drying machine adopts "Center-adjusting roller device ", make the cooperation of roller and rolling ring always show linear contact which greatly reduces the wear and power consumption. 

7. According to customer's request control product size and moisture, when dry slime, the moisture can reach below 8%, particle size can be controlled below 8mm.

Our dryer machine exported to Vietnam

Reliable Performance Biomass Drum Dryer